• 74R-DS10U-017-SHU-001

Mini PC Barebone Industrial Core I5 Shuttle DS10U5 - Fanless

      XPC slim DS10U5

      Fanless Slim PC with a Whiskey-Lake-U processor in industrial design


      The DS10U-series is a fanless slim PC with a robust 1.3-litre metal chassis and exceptional connectivity. It supports two digital video outputs for UHD/4K displays and one traditional D-Sub/VGA connector. The built-in Intel "Whiskey-Lake-U" processor provides ample performance for playback of 2160p/60 videos. Installation of components goes straight forward, as there is plenty of interior space for two memory modules, one 2.5" drive and an M.2-2280 SSD card. Optionally, an LTE module can be fitted in the 2,5" bay using the WWN03 accessory. Thanks to its passive cooling, the system is virtually maintenance-free and is approved for 24/7 nonstop operation. It is big on performance, yet extremely energy-efficient. The Shuttle XPC slim Barebone DS10U series is an ideal platform for professional applications such as digital signage, POS, Kiosk, Thin Client, Office PC and Multimedia.

      • Fanless and Silent
        Passive cooling, no fan noise at all
        Perfect to be used in noise-sensitive environments
        Fanless, dust-free and thus virtually maintenance-free
      • Low Power Consumption
        Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only
      • 24/7 Nonstop Operation
        This device is approved for 24/7 permanent operation.
        Requirements:
        - Free circulation of air amongst the PC must be guaranteed.
        - Ventilation holes must stay clear.
        - If a hard disk is installed, this must also be approved for permanent operation by its manufacturer
      • Chassis
        Slim-PC with black steel chassis
        Without cooling fan, passive cooling only
        The bays for memory, 2.5" drive and M.2 card
        can easily be accessed by removing two cover plates.
        Dimensions: 200 x 165 x 39.5 mm (LWH) = 1.3 litres
        Weight: 1.5 kg net and 2.2 kg gross
        Two holes for Kensington Lock and numerous 
        threaded holes (M3) at both sides of the chassis
      • Operating Position
        1) Vertical: Usual operating position with the supplied feet (DisplayPort output facing up).
        2) VESA-mounted: The device can also be mounted behind an appropriate monitor using the supplied VESA mount kit.
        Note: From a thermal point of view horizontal operation is permitted. However, there are no rubber feet on the device. The maximum operating temperature is 35 °C then.
      • Operating System
        This barebone system comes without operating system.
        It is compatible with Windows 10 (64-bit) and Linux (64-bit).
      • Processor
        Model: Intel Core i5-8265U (ULV)
        System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
        FCBGA1528 package - directly soldered onto the mainboard
        Code name: Whiskey Lake U (8th Generation Intel Core)
        Cores / Threads: 4 / 8
        Clock rate: 1.6 GHz
        Max. Turbo Frequency: 3.9 GHz
        L1/L2/L3 Cache: 128 kB / 512 kB / 6 MB
        TDP wattage: 15 W maximum
        Manufacturing process: 3rd-generation enhanced 14nm++
        Maximum Tjunction Temperature: 100 °C
        Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
      • Integrated Graphics
        Intel UHD Graphics 620
        GPU clock frequency: 300~1100 MHz
        Execution Units (EUs): 24
        Supports DirectX 12
        Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
        Supports Quick Sync Video and Clear Video HD technology
        Supports up to three independent screens:
        1) DisplayPort 1.2 supports Ultra HD @ 60 Hz
        2) HDMI 2.0a supports Ultra HD @ 60 Hz
        3) D-Sub/VGA supports analog displays
      • Mainboard / BIOS
        Shuttle Mainboard FS10
        All capacitors are high quality solid capacitors
        Supports resume after power failure [6]
        Supports Wake on LAN (WOL)
        Supports Power on by RTC Alarm
        Supports boot from M.2 SSD cards, USB devices and SD card reader
        AMI BIOS in 8 MByte EEPROM with SPI interface
        Supports hardware monitoring and Watchdog function
        Supports Unified Extensible Firmware Interface (UEFI)
        Supports Firmware-TPM (fTPM) Version 2.0
      • Power Adapter
        External 65 W power adapter (fanless)
        Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
        Output: 19 V DC, max. 3.42 A, max. 65 W
        DC cable length: ca. 170 cm
        AC cable length: ca. 170 cm (with 2-pin Europlug)
      • DC Input connector
        DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
        The DC-input of the computer supports an external
        power source with either 12V±5% or 19V±5%.
      • Memory support
        2x SO-DIMM slot with 260 pins
        Supports DDR4-2400 (PC4-19200) SDRAM at 1.2 V
        Supports DDR4-2666 at 2400 MHz
        Supports Dual Channel mode
        Supports a maximum of 32 GB per DIMM,
        maximum total size: 64 GB
        Supports two unbuffered DIMM modules (no ECC or registered)
      • 2.5" Drive Bay with SATA connector
        Supports one Serial ATA hard disk
        or one SATA SSD drive in 6.35 cm / 2.5" format
        Device height: max. 12.5 mm
        Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
        Supports Unified Extensible Firmware Interface (UEFI)
        Note: no Serial ATA cable is required. Please also refer to note [2].
      • M.2 Slot for SSDs
        The M.2 2280 BM slot provides the following interfaces:
        - PCI-Express Gen. 3.0 X4 with up to 4 GB/s
        - SATA v3.0 (max. 6 Gbps)
        It supports M.2 cards with a width of 22 mm
        and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
        Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe NVMe SSDs (with M key)
      • Card Reader
        Integrated SD card reader
        Supports SD, SDHC and SDXC memory flash cards
        Supports booting from SD card
      • Audio
        Audio Realtek® ALC 662 High-Definition Audio
        Two analog audio connectors (3.5 mm) at the front panel:
        1) 2 channel line out (headphones)
        2) microphone input
        Digital multi-channel audio output: via HDMI and DisplayPort
      • Dual Gigabit LAN
        Dual network with two RJ45 ports
        Used network chips:
        1) Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
        2) Intel i219LM PHY connected to the MAC of the processor
        Supports 10 / 100 / 1.000 MBit/s operation
        Supports WAKE ON LAN (WOL)
        Supports network boot by Preboot eXecution Environment (PXE)
        Supports Teaming mode [3]
      • Wireless Network (WLAN)
        Built-in M.2-2230-A/E WLAN card with two external antennas
        WLAN Controller Realtek RTL8821AE
        Supports WiFi IEEE 802.11b/g/n/ac in the 2.4 / 5 GHz band, 1T1R
        Supports 20 / 40 / 80 MHz channel bandwidth
        Security: supports WPA(-PSK), WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x, IEEE 802.11i
        Supports Bluetooth 4.0 in the 2.4 GHz band
      • Front Panel connectors/buttons
        2x USB 3.2 Gen 2 (max. 10 Gbps)
        4x USB 2.0
        Microphone input
        Audio Line-out (headphones)
        SD card reader (supports SD, SDHC, SDXC)
        Power button
        Power LED (blue)
        HDD LED (yellow)
      • Back Panel connectors
        DisplayPort 1.2
        HDMI 2.0a
        D-Sub/VGA
        2x USB 3.2 Gen 2 (max. 10 Gbps)
        2x Intel Gigabit LAN (RJ45)
        Serial COM port (5V / 12V, switchable to RS232 / RS422 / RS485) [1]
        DC-input connector for external power adapter
        4-pin connector (2.54 mm pitch) for power button, Clear CMOS and 5 V DC [4]
      • Always-On Jumper
        By removing Jumper J9 (please refer to the quick user guide),
        the system will start unconditionally once power is applied. [6]
      • Scope of Delivery
        Multi-language user guide
        Two metal feet with four screws M3 x 7 mm
        2x external WLAN antenna
        VESA mount for 75/100mm standard (two metal brackets)
        Four screws M3 x 7 mm (screws together VESA mount and PC)
        Four screws M4 x 10 mm (to fix the VESA mount to the external surface)
        Two screws M3 x 5 mm to mount a 2.5" storage in the bay
        Two screws M3 x 5 mm to mount M.2 cards
        Driver DVD for Windows 10 (64-bit)
        External 65W power adapter with power cord (Europlug)
      • Optional Accessories
        PCP11: adapter cable for the second COM port (replaces the VGA port)
        CXP01: adapter cable for external power button
        WWN03: LTE adapter kit for the 2.5" bay including two external LTE antennas [2]
        PRM01: 2U rack mount front plate for two Shuttle XPC slim
        DIR01: mounting kit for 35 mm DIN-Rail
      • Environmental Specifications
        Operating temperature range: 0~40 °C [5]
        Relative humidity, non-condensing: 10~90 %
      • Conformity & Certifications
        EMI: FCC, CE, BSMI, C-Tick
        Safety: ETL, CB, BSMI
        Other: RoHS, Energy Star, ErP
        This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
        (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
        (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
        (3) 2009/125/EC relating to eco design requirements for energy-related products (ErP),
        (4) 2014/53/EU Radio Equipment Directive (RED)

      Footnote:

      [1] Jumper for COM port configuration
      Pin 9 of the COM-Port is a multi-functional signal. Based on the Jumper JP1 configuration on the mainboard, it can be configured as Ring Indicator (RI) or external power supply with a voltage level of either 5 V or 12 V. Each COM port can be configured separately. The operating mode of COM 1 can be set to RS232, RS422 or RS485 in the BIOS. 
      The second COM port (COM 2) supports RS232 mode only, and in the standard SKU of DS10U5 this is only available as an onboard connector on the mainboard. An appropriate adapter (e.g. the optional accessory PCP11) is required in order to provide this port as D-Sub connector at the back panel. In this case the VGA port cannot be used..
      [2] LTE Adapter Kit WWN03
      Using the LTE adapter kit WWN03 means, that the 2.5" bay can no longer be used for SATA drives in 2.5" format (hard disk or SSD). An SSD card in the M.2-2280 format must be used instead.
      [3] Teaming Mode
      The teaming function allows you to group both available network adapters together to function as a single adapter. The benefit of this approach is that it enables load balancing and failover.
      Driver download: https://downloadcenter.intel.com/download/21642
      [4] Four-pin header at the back panel
      This header allows for connecting an external power button.
      It also provides 5 V DC voltage for external devices and the Clear CMOS function. Optional accessory: the adapter cable CXP01.
      [5] Caution: For ambient temperatures higher than 35 °C we strongly recommend to use an SSD instead of an HDD
      [6] Power on after power fail:
      The BIOS setup provides a "Power-On after Power Fail" function that can be found under "Power Management Configuration". This function determines the PC's behaviour after power failure. As a matter of the nature of this function, it may fail after short power failures. This is why the Shuttle XPC slim Barebone DS10U5 also comes with a hardware-based solution. By removing Jumper J9 (please refer to the quick user guide), the system will start unconditionally once power is applied.
      [7] HDMI output supports DVI-D with an optional adapter
      [8] How to convert DisplayPort into HDMI/DVI
      The DisplayPort output can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
      DELOCK 82590: 1 m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
      DELOCK 82435: 5 m, DisplayPort (male, 20p) to DVI-D (male, 24p)
      The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either through DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
      However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.

      74R-DS10U-017-SHU-001


      Etiquetas: 74R-DS10U-017-SHU-001

      2022 © Mtronica